The BCM Gunfighter Mod 3 is a drop-in pistol grip for AR-15 and M4 rifles, fitting any standard AR-15/M4 lower receiver on the supplied grip screw.
The BCM Gunfighter Mod 3 Grip takes the Gunfighter formula — reduced angle for improved ergonomics and trigger control, high-traction texture, an extended forward tang that closes the gap between trigger guard and grip — and widens the body by up to a quarter of an inch over the Mod 0 and Mod 1. The extra width fills a large or gloved hand, and the high-rise beavertail-style back strap indexes the web of the hand high on the receiver so the hold repeats itself shot after shot.
Storage is a hinged trap door sealed by a water-resistant rubber gasket, which is the practical difference between this grip and the plain removable cap on the Mod 1 — a spare battery or small parts stay dry in it. Manufactured in the USA from high-quality impact-resistant polymers by Bravo Company USA.
How It Compares
If the extra width is more than you want, the Gunfighter Mod 2 is the slim body in the same family.
Key Features
- Widest Gunfighter profile — up to a quarter of an inch wider than Mod 0 and Mod 1
- Hinged trap door with rubber gasket — water-resistant internal storage
- Extended forward tang — closes the gap behind the trigger guard
- High-rise beavertail back strap — a high, repeatable hold
- Two finishes — Black or Flat Dark Earth
Compatibility & Fitment
Fits standard AR-15/M4-pattern lower receivers as a drop-in replacement for the factory pistol grip. The grip screw and washer are supplied, so it is one tool and five minutes. The only thing to watch is the safety selector detent and spring, which sit in the receiver under the old grip and are easy to lose; work over a tray.
Technical Specifications
Platform | AR-15 / M4 |
Fits | Standard AR-15/M4 lower receiver |
Type | Pistol grip with internal storage (hinged trap door, gasketed) |
Material | High-impact polymer |
Finish | Black, Flat Dark Earth |
Made in | USA |
Brand | Bravo Company USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Does the Mod 3 grip fit a standard AR-15 lower?
Yes, it is a drop-in replacement for standard AR-15/M4 pistol grips and the grip screw and washer are supplied. Remove the old grip, take care of the safety detent and spring that sit under it, then fit the new one. No permanent alteration to the receiver is involved.
How much wider is the Mod 3 than the other Gunfighter grips?
Bravo Company USA describes it as up to a quarter of an inch wider than the Mod 0 and Mod 1. That is enough to notice in the hand rather than a token change, and it is the reason most people buy it: larger hands and glove users get more to hold and more contact area. If your hands are on the smaller side, the Gunfighter Mod 2 is the slim body in the same range.
What is the storage compartment like?
It is a hinged trap door with a water-resistant rubber gasket, rather than the plain removable cap used on the Gunfighter Mod 1. The gasket is the point: a spare battery or small parts stay dry in weather. The door stays attached to the grip, so there is nothing loose to drop.
What does the extended tang and beavertail actually do?
The extended forward tang closes the gap between the trigger guard and the grip, so the middle finger has no sharp edge to sit against. The high-rise beavertail fills the web between thumb and forefinger, which indexes the hand high on the receiver and stops the grip shifting under recoil. Together they make the hold repeatable, which is what matters more than comfort alone.
