The Calculated Kinetics DOGTAG Optic Plate with Rear Sight for Springfield Prodigy is a 7075 hard-anodized black plate with rear iron sights built in for a co-witness. Calculated Kinetics states it cuts carbon buildup on the optic by 85%.
Made in Chandler, Arizona, it is offered here for ACRO-footprint optics or the Holosun EPS. Explore more red dot and optic mounts, the full Calculated Kinetics range, or read our guide to pistol red dots and optic footprints before you match a plate to your Prodigy.
Ideal For
- Springfield Armory Prodigy pistols
- Shooters who want integrated rear irons for a co-witness
- ACRO, ACRO P2 and Holosun EPS users
Key Features
- DOGTAG deflection table: Calculated Kinetics builds a deflection table into the plate to reduce carbon buildup on the optic's front lens
- Single-arm slide manipulation: the deflection table doubles as an impingement point for working the slide one-handed
- Casing protection: helps shield the optic glass from stray, erratically ejected casings
- Integrated rear iron sights for co-witness
- Carbon reduction: 85% on the optic, per Calculated Kinetics
- Material: 7075 aluminum, hard anodized black
- Made in Chandler, AZ
Compatibility & Fitment
Made for the Springfield Armory Prodigy optic plate system; Calculated Kinetics lists it as its Prodigy/Operator DOGTAG plate. Plate-to-slide screws are 6-48 x 0.25 in.
- ACRO / ACRO P2: lower 1/6 co-witness with the ACRO P2; lower 1/3 with the Steiner MPS
- Holosun EPS: lower 1/3 co-witness; M3 x 9mm optic screws included
What's Included
- DOGTAG optic plate
- Plate-to-gun and optic-to-plate hardware
- Torx bit
- Vibratite
Technical Specifications
Platform | Springfield Armory Prodigy |
Footprints | ACRO/ACRO P2; Holosun EPS |
Iron Sights | Integrated rear sights |
Material | 7075 aluminum |
Finish | Hard anodized, black |
Plate-to-Slide Screws | 6-48 x 0.25 in |
Made In | Chandler, AZ, USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Does it have backup sights?
Yes. Rear iron sights are built into the plate to provide a co-witness.
What co-witness does the ACRO P2 get?
Calculated Kinetics lists a lower 1/6 co-witness with the ACRO P2, and lower 1/3 with the Steiner MPS.
How often should the mounting screws be replaced?
Calculated Kinetics recommends replacing the screws every 10,000 rounds, because pistols cycle at different rates and forces and screws carry optics and plates of different weights.