The Calculated Kinetics Optic Plate for Canik METE replaces the factory polymer optic adapters with hard-anodized black 7075 aluminum plates, and accommodates full-size optics.
Choose the ACRO footprint plate, the Holosun EPS/EPS Carry/K/RMSc DOGTAG plate, the RMR footprint plate or the Holosun 509T DOGTAG plate. Explore more red dot and optic mounts, the full Calculated Kinetics range, or read our guide to pistol red dots and optic footprints before you match a plate to your METE.
Ideal For
- Canik METE owners replacing the polymer optic adapters
- ACRO P2, Steiner MPS and Lead & Steel PB3 users (ACRO plate)
- Holosun EPS, EPS Carry, 407K/507K and SCS Carry users (DOGTAG plate)
- Holosun 407C, 507C, 508T and Trijicon RMR users (RMR footprint plate)
- Holosun 509T users (509T DOGTAG plate)
Key Features
- Aluminum upgrade: 7075 aluminum in place of Canik's polymer adapters
- Finish: hard anodized black
- DOGTAG options: the EPS/K/RMSc and 509T plates are DOGTAG designs with a deflection table
- Complete kit: hardware, Torx bits and Vibratite included
Compatibility & Fitment
Fits the Canik METE. Calculated Kinetics states it will not work with any MC9 series or the Prime/Prime Radian, which use a different footprint. There are two METE versions; check the manufacturer's photos to confirm yours, because Version 2 requires the separate TTI ACRO plate for ACRO-footprint optics.
- ACRO footprint: Steiner MPS, Lead & Steel PB3 and ACRO P2. With Angry Bear Arms optics-ready sights: lower 1/3 co-witness (MPS, PB3) or lower 1/5 (ACRO P2). M4 x 8mm plate screws
- Holosun EPS / EPS Carry / 407K / 507K / SCS Carry / RMSc DOGTAG: 1/3 co-witness with OEM iron sights; M4 x 13mm oval-head hardware. Calculated Kinetics also lists this plate, with the Mecanik M04, for the Canik TTI Combat
- RMR footprint: Holosun 407C, 407 Comp, 507C, 507 Comp, 508T, Trijicon RMR, RMR Type 2 and Osight C/X. Will not co-witness with OEM iron sights; lower 1/4 co-witness with Angry Bear Arms optics-ready sights. M4 x 8mm plate screws, 6-32 x 8.3mm optic screws (Holosun and Osight) and 6-32 x 0.417 in optic screws (Trijicon). A sealing plate is required with a Trijicon RMR
- Holosun 509T DOGTAG: M4 x 7mm Torx screws; Calculated Kinetics describes the co-witness with Angry Bear Arms optics-ready sights as barely usable
What's Included
- Optic plate for the selected footprint
- All hardware
- Torx bits
- Vibratite
Technical Specifications
Platform | Canik METE (DOGTAG plate also listed for TTI Combat) |
Not Compatible | MC9 series, Prime, Prime Radian |
Footprints | ACRO; Holosun EPS/EPS Carry/K/RMSc; RMR; Holosun 509T |
Material | 7075 aluminum |
Finish | Hard anodized, black |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Does this fit the Canik MC9 or Prime?
No. Calculated Kinetics says the MC9 series and Prime/Prime Radian use a different footprint.
Which ACRO plate do I need for a Version 2 METE?
Calculated Kinetics says Version 2 of the METE requires the TTI ACRO plate, sold separately, so compare your slide to the manufacturer's version photos first.
Do I keep my factory sights?
With the EPS/K/RMSc DOGTAG, Calculated Kinetics lists a 1/3 co-witness with the OEM iron sights. The RMR footprint plate will not co-witness with OEM iron sights, and ACRO, RMR and 509T co-witness figures are given with Angry Bear Arms optics-ready sights.
How often should the mounting screws be replaced?
Calculated Kinetics recommends replacing the screws every 10,000 rounds, because pistols cycle at different rates and forces and screws carry optics and plates of different weights.