The Kastle Group ACRO-193 Fortress 1.93-Inch Optic Mount for Aimpoint ACRO places an ACRO-footprint red dot at a 1.93 in optical centerline. Kastle describes the height as a bridge between traditional iron sight height and a raised optic position, and it clamps to any MIL-STD-1913 Picatinny rail with a titanium K-Clamp.
It is machined in the USA from 7075-T651 aluminum with a Type III hardcoat. Explore more red dot and optic mounts, the full Kastle Group range, or read our guide to co-witnessing a red dot with iron sights.
How It Compares
Kastle says the ACRO-193 and ACRO-226 share the same construction, materials and mounting technology; the main difference is height. The ACRO-226 is described as slightly more modular and accepts accessories such as the RMR-45 offset mount.
Ideal For
- Aimpoint ACRO P-1, P-2 and C-2 owners building a rifle or carbine
- Shooters who want a lower profile than a 2.26 in mount
- Setups that keep backup iron sights in play
Key Features
- 1.93 in optical centerline for ACRO-footprint optics
- Titanium K-Clamp: patent-pending clamp that spreads clamping force across the rail; the mount recesses into the Picatinny rail with a two-point recoil lug system front and rear for return to zero
- Material: 7075-T651 aluminum
- Finish: Type III MIL-SPEC hardcoat anodized
- Tested by Kastle: -40 to +160 °F operating range, 96-hour ASTM B117 salt spray, MIL-STD-810 vibration and a 12 ft drop onto concrete
- 100% made in the USA, machined in Kastle's own facility
Compatibility & Fitment
- Optics with the Aimpoint ACRO footprint. Kastle lists the Aimpoint ACRO P-1, ACRO P-2 and ACRO C-2, Steiner MPS, Lead & Steel PB-3, and Viridian RFX45 and RFX44.
- Any MIL-STD-1913 Picatinny rail; Kastle states it needs 6 rail slots.
- Kastle says most flip-to-side 3x and 5x magnifiers made for lower optic heights will work; confirm your magnifier is rated for a 1.93 in centerline.
What's Included
- ACRO-193 optic mount
- Mounting hardware
- T25 Torx bit
Technical Specifications
Optical Centerline | 1.93 in (49.02 mm) |
Optic Footprint | Aimpoint ACRO |
Rail Interface | MIL-STD-1913 Picatinny, titanium K-Clamp |
Rail Slots Required | 6 |
Overall Length | 2.15 in (54.6 mm) |
Weight | 2.6 oz (73.7 g) without optic |
Material | 7075-T651 aluminum |
Finish | Type III MIL-SPEC hardcoat anodized |
Torque | 25 in-lbs |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Should I choose the 1.93 in or 2.26 in height?
Kastle suggests the 1.93 in ACRO-193 for a lower profile with backup iron sight compatibility, and the 2.26 in ACRO-226 for extra clearance for night vision devices or a higher mounting position.
What torque and tools does it need?
Kastle specifies 25 in-lbs. A T25 Torx bit is included; you will also need a torque wrench that reaches 25 in-lbs. Kastle warns that over-torquing can damage the rail or mount.
Can I have it Cerakoted?
Kastle recommends ordering the Clear finish for custom Cerakote work.
What warranty does Kastle Group offer?
Kastle Group states a lifetime warranty for the original purchaser covering defects in materials and workmanship. Normal wear, abuse and modifications are not covered.