The Mission First Tactical Battlelink Aluminum Minimalist Stock is a lightweight minimalist carbine stock for AR-15 and M4 rifles, fitting any Mil-Spec-diameter (1.148 in / 29.2 mm) carbine receiver extension.
The Mission First Tactical Battlelink Aluminum Minimalist Stock (BMSMIL-MTL-BL) machines its skeletal frame from 6061-T6 aluminum with a hard-coat anodized finish — a genuine metal stock at approximately 8.8 oz (250 g). Where polymer minimalist stocks trade rigidity for weight, the Battlelink's aluminum structure stays dead stiff under cheek pressure and recoil, giving a surprisingly stable weld from a stock this light and open.
Rear sling slots and QD points integrate cleanly into the frame, and the minimalist geometry keeps the rifle's balance forward and fast. Made in the USA by Mission First Tactical, it gives lightweight builds a distinctive, engineered rear end.
Key Features
- 6061-T6 aluminum construction — metal rigidity at 8.8 oz (250 g)
- Hard-coat anodized finish — wear resistance polymer cannot offer
- Skeletal minimalist geometry — fast balance, striking looks
- Integrated sling slots + QD points — rig without add-ons
Compatibility & Fitment
Fits AR-15/M4 rifles with a Mil-Spec-diameter carbine receiver extension, quoted at 1.148 in (29.2 mm), and slides straight on in place of an existing collapsible buttstock. Commercial-diameter tubes will not take it, so measure your tube if you are not certain which type is fitted. The rear sling slots take webbing and the QD points take standard quick-detach swivels; slings and swivels are not included.
Technical Specifications
Platform | AR-15 / M4 |
Fits | Mil-Spec carbine receiver extension (1.148 in / 29.2 mm) |
Type | Minimalist carbine stock |
Material | 6061-T6 aluminum, hard-coat anodized |
Weight | Approx. 8.8 oz (250 g) |
Mount Interface | Rear sling slots + QD points |
Made in | USA |
Brand | Mission First Tactical |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will the Battlelink Aluminum fit my carbine?
It is made for AR-15/M4 rifles with a Mil-Spec-diameter carbine receiver extension, quoted at 1.148 in (29.2 mm), and slides straight on in place of an existing collapsible buttstock. Commercial-diameter tubes will not take it. Measure your tube if you are not certain which type is fitted.
Why choose an aluminum minimalist stock over a polymer one?
The body is machined from 6061-T6 aluminum and hard-coat anodized, so it is more rigid and more abrasion-resistant than a molded stock while staying minimalist in profile at roughly 8.8 oz (250 g). The trade-off is that a skeletonized metal stock gives less cheek surface and is colder to the face than polymer. It suits builds where a slim, hard-wearing stock matters more than a broad cheek weld.
What sling attachment does it offer?
There are rear sling slots for webbing plus QD points, so you can run a traditional loop or a quick-detach swivel depending on how you carry the rifle. Swivels and slings are not included. If you are running a two-point sling with a forward mount, match the rear QD to whatever swivel you already use.
Is there more than one finish, and what else do I need?
This one is supplied in a single configuration rather than a color range, so the only decision is whether the minimalist profile suits you. Fitting needs nothing beyond a compatible buffer tube.
