The Reptilia PULLER for AR-10 is an ambidextrous charging handle for AR-10 and SR-25 pattern rifles, machined from billet 7075-T6 aluminum with leverage optimized for the larger receiver.
A .308 AR is heavier to cycle than a 5.56 — this is the handle built around that fact.
This is not the AR-15 PULLER scaled up. Reptilia describes it as purpose-built for the platform, with the lever geometry optimized for the larger receivers an AR-10 or SR-25 uses. The bigger bolt carrier and heavier spring mean more force through the handle every time it is worked, and a handle designed around a 5.56 receiver is doing that job at a disadvantage.
It is machined from billet 7075-T6 aluminum and finished in MIL-STD Type III, Class 2 hardcoat anodize, with a low-profile, anti-snag body and true ambidextrous operation for consistent manipulation from either side. Reptilia builds it in the USA.
Key Features
- Leverage optimized for AR-10 receivers: The extra force a .308 needs is designed into the lever
- True ambidextrous operation: Cycle from either side without moving your firing hand
- Low-profile, anti-snag body: Clears optics and mounts, catches nothing
- Billet 7075-T6 aluminum: Machined from solid billet
- MIL-STD Type III, Class 2 hardcoat anodize: Hard-wearing where your hand works the rifle
Compatibility & Fitment
Fits AR-10 pattern upper receivers, including SR-25 and other .308 AR builds. It will not fit an AR-15 or M4 upper — for those, the correct part is the PULLER AR-15 Charging Handle. The two are sized for different receivers and are not interchangeable.
Technical Specifications
Platform | AR-10 / SR-25 / .308 AR pattern |
Fits | AR-10 pattern upper receivers |
Type | Ambidextrous charging handle |
Material | Billet 7075-T6 aluminum |
Finish | MIL-STD Type III, Class 2 hardcoat anodized — Black Anodized, FDE Anodized |
Made in | USA |
Brand | Reptilia |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Why not just use the AR-15 PULLER on an AR-10?
Because it will not fit. The AR-10 receiver is a different size, and Reptilia builds this version with lever geometry optimized for it. A .308 bolt carrier and spring also put more force through the handle on every cycle, which is exactly what the larger lever is there to handle.
Which AR-10 uppers does it fit?
AR-10 pattern uppers, including SR-25 and other .308 AR builds. AR-10 pattern receivers vary more between manufacturers than AR-15 ones do, so if your upper is unusual it is worth checking with us before ordering.
