The Calculated Kinetics DOGTAG Optic Plate for Kimber 2K11 and DS Warrior is a 7075 hard-anodized COMP plate for Kimber pistols with the loaded chamber indicator (LCI) on top. Calculated Kinetics notes few plates reduce carbon on this layout, and says the DOGTAG system cuts carbon buildup by 50% or more depending on the plate.
It is made in Chandler, Arizona, in RMR and DeltaPoint Pro footprints. Explore more red dot and optic mounts, the full Calculated Kinetics range, or read our guide to pistol red dots and optic footprints before you match a plate to your Kimber.
Ideal For
- Kimber 2K11 and DS Warrior pistols
- Kimber 1911 Optics Ready models such as the KHX Custom and Rapide
- Competition and range guns running RMR or DPP-footprint optics
Key Features
- Carbon reduction: 50% or more depending on the plate, per Calculated Kinetics
- Designed around the top-mounted LCI of the 2K11
- Material: 7075 aluminum, hard anodized
- Made in Chandler, AZ
- Plate-to-slide screws: 6-40 x 5/16 in, included
Compatibility & Fitment
Fits the Kimber 2K11, DS Warrior and any Kimber 1911 Optics Ready model, such as the KHX Custom and Rapide, per Calculated Kinetics.
- COMP RMR footprint: all RMR footprint optics; 6-32 x 9.1mm screws for Holosun, Osight and most overseas optics, and 6-32 x 0.417 in screws for Trijicon optics
- COMP DPP footprint: all DPP footprint optics; M4 x 10mm screws for the Defender XL/ST and SIG Romeo Pro, and M4 x 10mm oval-head screws for the Enclosed ST, Venom Enclosed, SCS 320 and EFLX
Important: on California-compliant models with an LCI, Calculated Kinetics says the right front plate-to-gun screw must be shortened to 0.25 in or less so it does not contact the LCI, or the gun will be damaged. On a DS Warrior you will likely need a 1.0 shim or the optic may run out of elevation.
What's Included
- DOGTAG optic plate for the selected footprint
- All necessary hardware
- Torx bits
- Vibratite
Technical Specifications
Platform | Kimber 2K11, DS Warrior, Kimber 1911 Optics Ready models |
Footprints | RMR (COMP), DeltaPoint Pro (COMP) |
Material | 7075 aluminum, hard anodized |
Carbon Reduction | 50% or more depending on plate (manufacturer stated) |
Plate-to-Slide Screws | 6-40 x 5/16 in |
Made In | Chandler, AZ, USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Do I need a shim on a DS Warrior?
Calculated Kinetics says you will likely need a 1.0 shim on a DS Warrior, or the optic may run out of elevation.
Is anything different on California-compliant Kimbers?
Yes. The right front plate-to-gun screw must be shortened to 0.25 in or less so it does not contact the LCI.
How often should the mounting screws be replaced?
Calculated Kinetics recommends replacing the screws every 10,000 rounds, because pistols cycle at different rates and forces and screws carry optics and plates of different weights.