The Calculated Kinetics DOGTAG Optic Plate for Walther PDP and PDP F-Series is a 7075 hard-anodized black plate for the Walther PDP 2.0 and F-Series. Calculated Kinetics makes it 100% in the USA and ships it with the screws, tools, instructions and thread locker needed for installation.
Five footprints are listed here, including a DUTY DPP plate for the Vortex Defender ST and SIG Romeo-X Pro. Explore more red dot and optic mounts, the full Calculated Kinetics range, or read our guide to pistol red dots and optic footprints before you match a plate to your PDP.
Ideal For
- Walther PDP 2.0 and PDP F-Series pistols
- Carry and duty PDPs running an ACRO, 509T, RMR, DPP-footprint or EPS/RMSc optic
- Shooters pairing the plate with AmeriGlo optic-height sights
Key Features
- DOGTAG deflection table: Calculated Kinetics builds a deflection table into the plate to reduce carbon buildup on the optic's front lens
- Single-arm slide manipulation: the deflection table doubles as an impingement point for working the slide one-handed
- Casing protection: helps shield the optic glass from stray, erratically ejected casings
- Material: 7075 aluminum, hard anodized black
- Made in the USA: 100% made in the USA, per Calculated Kinetics
- Complete install kit: screws, tools, instructions and thread locker included
Compatibility & Fitment
Fits the Walther PDP 2.0 and F-Series. All plates use M3 x 8mm plate-to-slide screws. Optics and co-witness by footprint, per Calculated Kinetics:
- ACRO / ACRO footprint / AEMS Micro: lower 1/5 co-witness with AmeriGlo GL-429 sights using an ACRO P2
- Holosun 509T / AEMS Macro: lower 1/5 co-witness with AmeriGlo GL-429
- DPP footprint (DUTY DPP): Vortex ST and ST Enclosed, Osight SE DPP, Holosun SCS 320 and SIG Romeo-X Pro; with GL-429 sights, lower 1/4 (Osight SE DPP), 1/6 (Vortex ST) or 1/5 (ST Enclosed); M4 x 10mm and M4 x 11mm oval-head optic screws
- Holosun EPS / EPS Carry / SCS Carry / CCW / RMSc footprint: also lists Osight SE and Vortex CCW and CCW Enclosed; co-witness with AmeriGlo GL-455; M3 x 9mm optic screws
- RMR footprint: Holosun 407C, 407 Comp, 507C, 507 Comp, 508T, Trijicon RMR, RMR Type 2, RCR, Osight C and X. Excludes forward-protruding optics such as the SRO and RMR HD. Lower 1/4 co-witness with GL-429; 6-32 x 8.3mm and 6-32 x 0.417 in optic screws
What's Included
- DOGTAG optic plate for the selected footprint
- Screws
- Tools
- Installation instructions
- Thread locker
Technical Specifications
Platform | Walther PDP 2.0 and PDP F-Series |
Footprints | ACRO, Holosun 509T, DPP (Duty), EPS/EPS Carry/RMSc, RMR |
Material | 7075 aluminum |
Finish | Hard anodized, black |
Plate-to-Slide Screws | M3 x 8mm |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will the RMR plate take a Trijicon SRO or RMR HD?
No. Calculated Kinetics excludes forward-protruding optics such as the SRO and RMR HD from the PDP RMR footprint plate.
Which DPP-footprint optics does the DPP plate support?
Calculated Kinetics lists the Vortex ST and ST Enclosed, Osight SE DPP, Holosun SCS 320 and SIG Romeo-X Pro.
How often should the mounting screws be replaced?
Calculated Kinetics recommends replacing the screws every 10,000 rounds, because pistols cycle at different rates and forces and screws carry optics and plates of different weights.
Is there a warranty?
Calculated Kinetics states its plates are backed by a lifetime warranty when installed by a trained professional.