The Kastle Group AEMS-193 1.93-Inch Optic Mount for Holosun AEMS, Black positions a Holosun AEMS-footprint enclosed optic at a 1.93 in optical centerline, between traditional iron sight height and an elevated optic position. It mounts with Kastle's titanium K-Clamp.
It is machined in the USA from 7075-T651 aluminum with a black Type III hardcoat. Explore more red dot and optic mounts, the full Kastle Group range, or read our Trijicon MRO vs Holosun AEMS comparison.
How It Compares
Kastle says the AEMS-193 and AEMS-226 share construction, materials and mounting technology. The 1.93 in height suits a lower profile with iron sight backup, while the 2.26 in AEMS-226 gives more clearance for night vision devices and accepts the DB-193 diving board.
Ideal For
- Holosun AEMS owners who want a lower mounting height
- Rifles that keep backup iron sights
- Compact, non-modular optic setups
Key Features
- 1.93 in optical centerline for AEMS-footprint optics
- Titanium K-Clamp: patent-pending clamp that spreads clamping force across the rail; the mount recesses into the Picatinny rail with a two-point recoil lug system front and rear for return to zero
- Material: 7075-T651 aluminum
- Finish: Type III MIL-SPEC hardcoat anodized, black
- Tested by Kastle: -40 to +160 °F operating range, 96-hour ASTM B117 salt spray, MIL-STD-810 vibration and a 12 ft drop onto concrete
- 100% made in the USA, machined in Kastle's own facility
Compatibility & Fitment
- Designed for any optic with the Holosun AEMS footprint.
- Fits Picatinny rails; Kastle states it needs 6 rail slots.
- Kastle states the AEMS-193 is not modular: it is not compatible with the Fortress accessory ecosystem and is not compatible with the DB-193 diving board.
- Kastle says most flip-to-side 3x and 5x magnifiers made for lower positions work; confirm yours is rated for a 1.93 in centerline.
What's Included
- AEMS-193 optic mount
- Mounting hardware
- T25 Torx bit
Technical Specifications
Optical Centerline | 1.93 in (49.02 mm) |
Optic Footprint | Holosun AEMS |
Rail Interface | Picatinny, titanium K-Clamp |
Rail Slots Required | 6 |
Dimensions | 2.15 in L x 1.39 in W x 1.14 in H |
Weight | 2.3 oz (65.2 g) without optic |
Material | 7075-T651 aluminum |
Finish | Type III MIL-SPEC hardcoat anodized, black |
Torque | 25 in-lbs |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Can I add a diving board or offset to it?
No. Kastle states the AEMS-193 is not modular and is not compatible with the DB-193. Kastle says the AEMS-226 accepts the DB-193.
What torque and tools does it need?
Kastle specifies 25 in-lbs. A T25 Torx bit is included; you will also need a torque wrench that reaches 25 in-lbs. Kastle warns that over-torquing can damage the rail or mount.
What warranty does Kastle Group offer?
Kastle Group states a lifetime warranty for the original purchaser covering defects in materials and workmanship. Normal wear, abuse and modifications are not covered.