The Kastle Group EXPS-226 2.26-Inch Optic Riser for EOTECH EXPS gives an EOTECH EXPS holographic sight a 2.26 in optical centerline, turning an M1913 Picatinny rail into a raised mounting surface for better ergonomics and target acquisition. It has a 3.5 in M1913 top rail and a titanium K-Clamp base.
Kastle machines it in the USA from 7075-T651 aluminum with a Type III hardcoat. Explore more red dot and optic mounts, the full Kastle Group range, or read our red dot vs holographic sight guide.
Ideal For
- EOTECH EXPS-2 and EXPS-3 owners
- Shooters who want a raised holographic sight on an AR-15 or AR-10
- Pairing a flip-to-side magnifier
Key Features
- 2.26 in optical centerline for the EOTECH EXPS
- M1913 Picatinny top rail, 3.5 in long
- Titanium K-Clamp: patent-pending clamp that spreads clamping force across the rail; the mount recesses into the Picatinny rail with a two-point recoil lug system front and rear for return to zero
- Material: 7075-T651 aluminum
- Finish: Type III MIL-SPEC hardcoat anodized
- Tested by Kastle: -40 to +160 °F operating range, 96-hour ASTM B117 salt spray, MIL-STD-810 vibration and a 12 ft drop onto concrete
- 100% made in the USA, machined in Kastle's own facility
Compatibility & Fitment
- Built for the EOTECH EXPS series. Kastle's XPS-226 FAQ says the XPS needs the XPS-226 instead, because the two optics have different factory heights.
- Fits MIL-STD-1913 Picatinny rails; Kastle states it needs 6 rail slots.
- Kastle says the height suits flip-to-side magnifiers; confirm your magnifier works at the raised height. Final height over bore depends on your optic and rail height.
What's Included
- EXPS-226 optic riser
- Mounting hardware
- T25 Torx bit
Technical Specifications
Optical Centerline | 2.26 in (57.4 mm) |
Designed For | EOTECH EXPS series |
Top Rail | 3.5 in (88.9 mm) M1913 section |
Rail Slots Required | 6 |
Material | 7075-T651 aluminum |
Finish | Type III MIL-SPEC hardcoat anodized |
Torque | 25 in-lbs |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will it fit my EOTECH XPS?
Kastle makes the XPS-226 for the XPS; its FAQ says the XPS and EXPS need different risers because of their different factory heights.
What torque and tools does it need?
Kastle specifies 25 in-lbs. A T25 Torx bit is included; you will also need a torque wrench that reaches 25 in-lbs. Kastle warns that over-torquing can damage the rail or mount.
Can I have it Cerakoted?
Kastle recommends ordering the Clear finish for custom Cerakote work.
What warranty does Kastle Group offer?
Kastle Group states a lifetime warranty for the original purchaser covering defects in materials and workmanship. Normal wear, abuse and modifications are not covered.