The Kastle Group XPS-226 2.26-Inch Optic Riser for EOTECH XPS turns an M1913 Picatinny rail into a raised platform that sets a compact EOTECH XPS holographic sight at a 2.26 in optical centerline. It carries a 2.5 in M1913 top rail and clamps down with Kastle's titanium K-Clamp.
It is machined in the USA from 7075-T651 aluminum with a Type III hard anodized finish. Explore more red dot and optic mounts, the full Kastle Group range, or read our red dot vs holographic sight guide.
Ideal For
- EOTECH XPS-2 and XPS-3 owners
- AR-15 and AR-10 carbines and SBRs
- Running a flip-to-side magnifier behind the sight
Key Features
- 2.26 in optical centerline for the EOTECH XPS
- M1913 Picatinny top rail, 2.5 in long
- Titanium K-Clamp mounting
- Material: 7075-T651 aluminum
- Finish: Type III hard anodized
- Tested by Kastle: -40 to +160 °F operating range, 96-hour ASTM B117 salt spray, MIL-STD-810 vibration and a 12 ft drop onto concrete
- 100% made in the USA, machined in Kastle's own facility
Compatibility & Fitment
- Built for the EOTECH XPS series. Kastle's FAQ says the XPS-226 is for the XPS and the EXPS-226 is for the EXPS, because the two optics have different factory heights.
- Fits MIL-STD-1913 Picatinny rails; Kastle states it needs 4 rail slots.
- Kastle says flip-to-side magnifiers work, but confirm your magnifier suits the raised height. Final height over bore depends on your optic and rail height.
What's Included
- XPS-226 optic riser
- Mounting hardware
- T25 Torx bit
Technical Specifications
Optical Centerline | 2.26 in (57.4 mm) |
Designed For | EOTECH XPS series |
Top Rail | 2.5 in (63.5 mm) M1913 section |
Rail Slots Required | 4 |
Weight | 2.8 oz (79.4 g) without optic |
Material | 7075-T651 aluminum |
Finish | Type III hard anodized |
Torque | 25 in-lbs |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Should I get the XPS-226 or the EXPS-226?
Kastle says the XPS-226 is for the EOTECH XPS and the EXPS-226 is for the EOTECH EXPS, because the two sights have different factory heights.
What torque and tools does it need?
Kastle specifies 25 in-lbs. A T25 Torx bit is included; you will also need a torque wrench that reaches 25 in-lbs. Kastle warns that over-torquing can damage the rail or mount.
Can I have it Cerakoted?
Kastle recommends ordering the Clear finish for custom Cerakote work.
What warranty does Kastle Group offer?
Kastle Group states a lifetime warranty for the original purchaser covering defects in materials and workmanship. Normal wear, abuse and modifications are not covered.