The Kastle Group FSM-154 Fortress Scope Mount, 1.54-Inch Centerline Height places the optic 1.54 in over the rail and is designed for optics from standard LPVOs to large-objective scopes. It combines titanium K-CLAMP rail mounting with four individual KNEKT ports for Kastle accessories.
Kastle machines it in the USA from 7075-T651 aluminum with a Type III MIL-SPEC hardcoat. Explore more rifle scope mounts, the full Kastle Group range, or read our scope mounting guide.
How It Compares
Kastle positions the 1.54 in FSM-154 as the height for most long-range and precision shooting, and the 1.93 in FSM-193 for shooters who prefer a heads-up position or need more clearance for night vision devices.
Ideal For
- Long-range and precision rifles
- LPVOs and large-objective scopes with 30mm, 34mm or 35mm tubes
- Shooters who want to add a Kastle level or other KNEKT accessories
Key Features
- Titanium K-CLAMP mounting: spreads clamping force across the rail to reduce rail deformation and support return to zero
- Recoil lugs: the mount recesses into the Picatinny rail with a two-point recoil lug system at the front and rear
- Four KNEKT ports: each uses a locating boss and two precision-ground shoulder bolts for a repeatable, return-to-zero accessory interface
- Zero MOA angle
- Material: 7075-T651 aluminum
- Finish: Type III MIL-SPEC hardcoat anodized
- 100% made in the USA, machined in Kastle's own facility
Compatibility & Fitment
Fits MIL-STD-1913 Picatinny rails. Offered here with 30mm or 34mm rings in Black or Flat Dark Earth, and 35mm rings in Black; Kastle also makes a 36mm version. Kastle says the full FSM line was tested with full-automatic select-fire weapons. A third-party tool is needed to level the optic in the mount.
What's Included
- FSM-154 scope mount
- All necessary hardware
- T25 and T10 Torx bits
Technical Specifications
Centerline Height | 1.54 in over rail |
Ring Diameter | 30mm or 34mm (Black or Flat Dark Earth); 35mm (Black) |
Cant | 0 MOA |
Rail Interface | MIL-STD-1913 Picatinny, titanium K-CLAMP |
Weight | 5.7 oz |
Dimensions | 5.27 x 2.54 x 1.8 in |
Material | 7075-T651 aluminum |
Finish | Type III MIL-SPEC hardcoat anodized |
Torque | Top ring screws 15 in-lbs; K-CLAMP 25 in-lbs |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Should I choose the 1.54 in or 1.93 in height?
Kastle recommends the 1.54 in for most long-range and precision shooting, and the 1.93 in for a heads-up position or extra clearance for night vision devices.
What torque values does Kastle specify?
Kastle specifies 15 in-lbs for the FSM top ring screws and 25 in-lbs for the K-CLAMP, using a torque wrench rated for 10 to 25 in-lbs. Over-torquing can damage the rail or mount.
What tools do I need?
Only the included T25 and T10 Torx bits and a torque wrench rated 10 to 25 in-lbs; a third-party tool helps level the optic.
What warranty does Kastle Group offer?
Kastle Group states a lifetime warranty for the original purchaser covering defects in materials and workmanship. Normal wear, abuse and modifications are not covered.