The Reptilia ROF-SAR is a red dot adapter for the Trijicon RMR and SRO, described by Reptilia as a drop-in upgrade for 30mm optics.
One optic footprint, one tube diameter. The ROF-SAR adds a miniature red dot to the scope you already run.
Machined from 7075 aluminum and Type III hardcoat anodized, at 1.3 oz (36 g). Reptilia specifies it for 30mm scope tubes with an objective diameter of 1.3in (33mm) or less, so the fit is decided by the scope, not by the rifle.
Two sighting solutions, one rifle. The magnified optic keeps the zero you set for distance; the dot is zeroed separately for close work and stays that way. On an AR-15, that means changing where you look rather than changing optics. Made in the USA.
Key Features
- Drop-in upgrade: Reptilia's own description; it fits 30mm optics with no rail work
- One footprint: Cut for the Trijicon RMR and SRO and nothing else
- 7075 aluminum: Type III hardcoat anodized, 1.3 oz (36 g)
- Objective limit published: For 30mm tubes with a 1.3in (33mm) objective or less
- Independent zero: The dot holds a close-range zero while the scope keeps yours
Compatibility & Fitment
Fits Trijicon RMR and SRO, plus Holosun HS407, HE407, HS507, HE507 and HE508 series, on a 30mm optic. Reptilia specifies 30mm scope tubes with an objective diameter of 1.3in (33mm) or less, so check your scope's objective as well as its tube. Optic footprint and tube diameter are both fixed on this listing: RMR footprint, 30mm. This version is Black only.
Technical Specifications
Fits | Trijicon RMR and SRO, plus Holosun HS407, HE407, HS507, HE507 and HE508 series — on a 30mm optic with a 1.3in (33 mm) objective or less |
Type | Ring-mounted red dot adapter, 12 o'clock |
Material | 7075 aluminum |
Finish | Type III hardcoat anodized — Black |
Weight | 1.3 oz (36 g) |
Made in | USA |
Brand | Reptilia |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will the ROF-SAR fit my scope?
It is made for 30mm optics, and Reptilia specifies an objective diameter of 1.3in (33 mm) or less. Check both figures on your scope before ordering.
Which red dots does it take?
One footprint: Trijicon RMR and SRO, plus the Holosun HS407, HE407, HS507, HE507 and HE508 series.
How is this different from the ROF-90 and the ROF-45?
The ROF-SAR replaces your mount's ring cap entirely, which is what lets it carry the dot low over the bore. The 30mm ROF-90 instead sits on top of the ring cap and holds the dot at 12 o'clock, and the 30mm ROF-45 holds it at 45 degrees so you roll the rifle to find it. All three take the same optic footprint and the same 30mm ring diameter, so the decision is where you want the dot rather than what will fit.
