The Warne 1 Inch Medium Scope Rings for Tikka mount straight onto the grooved dovetail of Tikka receivers, so no separate base is needed. A redesigned, Tikka-specific recoil pin engages the receiver dovetail and gives a stronger bearing surface for higher-recoiling rifles.
These solid steel, vertically split rings are machined to Warne's tolerances for the Tikka rail design and are made in the USA. Browse our full selection of rifle scope rings and the complete Warne range, and see our guide on how to choose scope rings for height and diameter advice.
Ideal For
- Tikka rifles with a grooved dovetail receiver
- Hunters running a 1 inch scope with an objective up to 42mm
- Shooters who want a low-profile setup with no separate base
- Heavier scopes and higher-recoiling calibers
Key Features
- Direct dovetail mount: attaches to the Tikka grooved receiver with no base
- Tikka-specific recoil pin: redesigned for a stronger bearing surface
- Solid steel: vertically split rings built for heavy recoil and heavy scopes
- Fixed rings: four T-15 Torx socket cap screws
- Made in the USA
Compatibility & Fitment
- Fits Tikka 3TX, 3T and 695 rifles, as listed by Warne
- Mounts to the grooved dovetail on the Tikka receiver; no base required
- 1 inch scope tube; objectives up to 42mm
Technical Specifications
Ring Diameter | 1 inch |
Height | Medium |
Dimension B | 0.460 in |
Dimension C | 0.705 in |
Objective Clearance | Up to 42mm |
Ring Split | Vertical |
Mounting | Fixed, direct to Tikka dovetail |
Material | Steel |
Finish | Matte black |
Weight | 5.6 oz |
Screws | Four T-15 Torx socket cap screws |
Bottom Screw Torque | 25 in-lb maximum, dry threads |
Top Screw Torque | Scope maker's rating, 25 in-lb maximum |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Do I need a base?
No. Tikka receivers have a grooved dovetail, and these rings mount to it directly.
Which Tikka rifles do they fit?
Warne lists the Tikka 3TX, 3T and 695.
What torque does Warne recommend?
Bottom screws to 25 in-lb maximum and top screws to the scope maker's torque, not exceeding 25 in-lb, on dry threads with no thread-locker.