The Warne Rimfire QD 1 Inch Medium Scope Rings add a quick-detach lever to Warne's rimfire ring, so a 1 inch scope can come off a .22 rifle and go back on without tools. They fit both 3/8 inch and 11mm dovetails found on many common rimfire rifles.
The steel rings use a 70/30 horizontal split and are designed and made in the USA. Medium height clears objectives up to 42mm. Browse our full selection of rifle scope rings and the complete Warne range, and see our guide on how to choose scope rings for height and diameter advice.
Ideal For
- Rimfire rifles with 3/8 inch or 11mm dovetails
- Shooters who swap a scope between rimfire rifles
- Removing the scope for storage, travel or cleaning
- 1 inch scopes with objectives up to 42mm
Key Features
- Quick-detach lever: tighten thumb-and-forefinger tight, no tools needed
- Dual dovetail fit: 3/8 inch and 11mm
- 70/30 horizontal split for easy scope installation
- Steel construction in matte black
- Made in the USA
Compatibility & Fitment
- Fits 3/8 inch and 11mm dovetails found on many common rimfire rifles
- 1 inch scope tube; objectives up to 42mm
Technical Specifications
Ring Diameter | 1 inch |
Height | Medium |
Dimension B | 0.400 in |
Dimension C | 0.502 in |
Objective Clearance | Up to 42mm |
Fits | 3/8 inch and 11mm dovetails |
Ring Split | 70/30 horizontal |
Mounting | Quick detach lever |
Material | Steel |
Finish | Matte black |
Weight | 3.8 oz |
Top Screw Torque | Scope maker's rating, 25 in-lb maximum, dry threads |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
How tight should the QD lever be?
Warne says thumb-and-forefinger tight is enough; there is no need to overtighten.
Will these fit my 11mm rimfire receiver?
Warne lists both 3/8 inch and 11mm dovetails.
What objective size will clear?
Warne rates this medium ring for objectives up to 42mm.