The Warne 30mm Steel Scope Rings for Tikka mount straight onto the grooved dovetail of Tikka receivers, so no separate base is needed. A redesigned, Tikka-specific recoil pin gives a stronger bearing surface for higher-recoiling rifles.
These solid steel, vertically split rings hold heavy recoil and heavy scopes, and come in medium or high height for 30mm scopes. They are designed and made in the USA. Explore more rifle scope rings, see the full Warne lineup, or read our guide on how to choose scope rings.
Ideal For
- Tikka rifles with the factory grooved dovetail receiver
- Hunters running a 30mm scope who want a clean, base-free setup
- Heavier scopes and higher-recoiling calibers
- Medium height for objectives up to 44mm, high for up to 52mm
Key Features
- Direct dovetail mount: attaches to the Tikka grooved receiver with no base
- Tikka-specific recoil pin: redesigned for a stronger bearing surface
- Solid steel: vertically split rings built for heavy recoil and heavy scopes
- Fixed rings: four T-15 Torx socket cap screws
- Designed and made in the USA
Compatibility & Fitment
- Fits Tikka T3x, T3 and 695 rifles, as listed by Warne
- Mounts to the grooved dovetail on the Tikka receiver; no base required
- 30mm scope tube; medium fits objectives up to 44mm, high up to 52mm
Technical Specifications
Ring Diameter | 30mm |
Ring Split | Vertical |
Mounting | Fixed, direct to Tikka dovetail |
Medium | Dimension B 0.460 in; Dimension C 0.705 in; objectives up to 44mm; 5.3 oz |
High | Dimension B 0.570 in; Dimension C 0.705 in; objectives up to 52mm; 6.4 oz |
Material | Steel |
Finish | Matte black |
Screws | Four T-15 Torx socket cap screws |
Torque | 25 in-lb maximum on dry threads, no thread-locker; use the scope maker's value if lower |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Do I need a base?
No. Tikka receivers have a grooved dovetail, and these rings mount to it directly.
Which height should I choose?
Warne rates the medium rings for objectives up to 44mm and the high rings for objectives up to 52mm.
What torque does Warne recommend?
25 in-lb maximum on dry threads with no thread-locker, or the scope maker's torque if it is lower.