The Warne Maxima Two-Piece Steel Scope Base for Remington 700 is a firearm-specific scope base for the Remington 700 and compatible actions.
Warne's Maxima bases are low-profile steel bases inspired by the Weaver design, with a full-width recoil slot that gives the recoil keys of Warne rings maximum bearing surface. Paired with Maxima QD rings, they let you look over the bases to use open sights. Browse our full selection of rifle scope mounts and the complete Warne range, and see our scope mounting guide for setup advice.
Ideal For
- Owners of the Remington 700 and compatible actions setting up a scope
- Hunters who want a low-profile steel base
- Hunting and general-purpose scope setups
- Rifles where open sights should stay usable with QD rings
Key Features
- Steel construction in a low-profile, Weaver-inspired design
- Full-width recoil slot: gives Warne ring recoil keys maximum bearing surface
- Open-sight friendly: with Warne Maxima QD rings you can look over the bases to use open sights
- 6-48 screws included; Torx 15 hardware
- Firearm-specific fitment, made in the USA
Compatibility & Fitment
- Remington 700 (per Warne product name)
- Bergara B-14
- BSA Monarch round receiver
- Christensen Arms bolt action Rem 700 style
- Churchill Highlander
- CVA Paramount Muzzleloader
- Herters U-9 (drilled and tapped)
- Howa 1500 & 1700
- Mauser Model 18
- Mossberg 1500 & 1700
- Nosler M48
- Raptor Arms
- Firearm-specific fitment: confirm your exact model and action length against this list
What's Included
- Two-piece base set
- 6-48 screws
Technical Specifications
Base Type | Maxima Two-Piece Steel Scope Base |
Fits | Remington 700 (per Warne product name), Bergara B-14, BSA Monarch round receiver, Christensen Arms bolt action Rem 700 style, Churchill Highlander, CVA Paramount Muzzleloader, Herters U-9 (drilled and tapped), Howa 1500 & 1700, Mauser Model 18, Mossberg 1500 & 1700, Nosler M48, Raptor Arms |
Pieces | Two-piece set |
Material | Steel |
Finish | Matte black |
Profile | Low profile, Weaver-inspired |
Recoil Slot | Full width |
Ring Compatibility | Designed for Warne Maxima rings |
Screws | 6-48, Torx 15 |
Base Screw Torque | 25 in-lb maximum; removable thread locker recommended |
Weight | 2.1 oz |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Which rifles does it fit?
Warne lists: Remington 700 (per Warne product name), Bergara B-14, BSA Monarch round receiver, Christensen Arms bolt action Rem 700 style, Churchill Highlander, CVA Paramount Muzzleloader, Herters U-9 (drilled and tapped), Howa 1500 & 1700, Mauser Model 18, Mossberg 1500 & 1700, Nosler M48, Raptor Arms.
Will it fit a Howa Superlite?
No. Warne states it will not fit the Howa Superlite action.
Which rings should I use?
Warne designed these bases for its Maxima rings; the full-width recoil slot engages the recoil keys of Warne rings.
What torque should I use on the base screws?
Warne recommends no more than 25 in-lb and a removable thread-locking compound.