The Badger Ordnance Condition One Modular Scope Mount (C.O.M.M.) is a one-piece cantilever scope mount that Badger designs as a central hub for attachments. Instead of hanging lasers and offset optics on a handguard, where they can deflect, the C1 gives you four accessory mounting points on the Unimount body: left, right, fore and aft.
Choose the ring diameter, height, cant and finish that suit your scope and rifle. Badger keeps C1 accessories at the same height and offset across the different main mount heights, so an offset dot or laser sits where you expect it on any C1.
Browse more rifle scope mounts or see the full Badger Ordnance range, and read our guide, Scope Mounting Guide: Rings, Bases, Height and Torque.
Ideal For
- 1.54" NV Height: shooters running in-line night vision devices, or wanting a lower cheek weld for precision work
- 1.70" Lower 1/3: matching the common height of lower 1/3 red dot optics on a rifle running an LPVO
- 1.93" Assaulter: a more upright head position, clearing lasers and attachments, or shooting with head-borne night vision or a gas mask
- Riflemen who want offset red dots, levels or laser range finder rails mounted to the scope mount rather than the handguard
Key Features
- Four accessory points: left, right, fore and aft on the Unimount body
- Consistent accessory geometry: accessories sit at the same height and offset across C1 mount heights
- Material: 7075-T6 aluminum with Type III hard coat anodizing
- Cantilever: 2.63" from the forward-most crossbolt to the rear of the front ring (30mm and 34mm); 2.8" on 35mm
- Cant: 0 MOA, or 20 MOA (5.8 MRAD) on the 1.54" NV Height versions in 30mm, 34mm and 35mm
- Not platform specific: Badger lists the C1 as a general-purpose mount
Compatibility & Fitment
- Ring diameters offered here: 30mm, 34mm and 35mm scope tubes
- Badger lists the 34mm 1.70" model as compatible with MIL-STD-1913 Picatinny and STANAG 4694 rails
- Accepts the Condition One J-Arm, Anti Cant Device and Accessory Ring Cap (ARC); Badger notes the ARC and Anti Cant Device are not compatible with the C1 MAX
- Height over bore on an AR-15, per Badger: 2.76" (1.54"), 2.92" (1.70"), 3.15" (1.93")
Technical Specifications
Type | One-piece cantilever scope mount with accessory ports |
Ring Diameter | 30mm, 34mm or 35mm (by variant) |
Ring Height to Center | 1.54", 1.70" or 1.93" (by variant) |
Height Over Bore (AR-15) | 2.76" / 2.92" / 3.15" |
Cant | 0 MOA / 0 MRAD; 20 MOA / 5.8 MRAD on the 1.54" NV Height 20 MOA versions (30mm, 34mm and 35mm) |
Cantilever | 2.63" (30mm and 34mm); 2.8" (35mm) |
Material | 7075-T6 aluminum |
Finish | Type III hard coat anodized, Tan or Black |
Weight | 6.2 oz to 6.6 oz depending on version |
Country of Manufacture | United States |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Which height should I choose?
Badger sizes the 1.54" mount to match common in-line night vision devices and give a lower cheek weld, the 1.70" mount to match lower 1/3 red dot height, and the 1.93" Assaulter mount for a more upright head position, clearing lasers and attachments, or shooting with head-borne night vision or a gas mask.
Can I add accessories to it?
Yes. The Unimount body has four accessory points (left, right, fore and aft) for Condition One accessories such as the J-Arm, Anti Cant Device and Accessory Ring Cap.
Do accessories change position between mount heights?
No. Badger states that C1 accessories sit at the same height and offset across the different main mount heights.
How high does it put the scope over the bore on an AR-15?
Badger lists 2.76" for the 1.54" mount, 2.92" for the 1.70" mount and 3.15" for the 1.93" mount.