The Badger Ordnance Condition One MAX Scope Mount is Badger's precision-rifle take on the Condition One system. Badger designed it from the ground up for precision shooters, blending its Max 50 scope ring and the C1 Modular Mount into one 1.54" tall mount.
Wide six-screw ring caps add coverage and clamping force on the scope tube, and there is no forward cantilever, which Badger says can help eye relief with some optic and short-action rail combinations.
Browse more rifle scope mounts or see the full Badger Ordnance range, and read our guide, Scope Mounting Guide: Rings, Bases, Height and Torque.
How It Compares
Against the standard Condition One Modular Mount, the MAX uses 1"-wide six-screw ring caps and drops the forward cantilever. It works with most of the C1 accessory line, but the Accessory Ring Cap (ARC) and Anti Cant Device (ACD) have MAX-specific versions; the standard ARC and ACD do not fit the MAX.
Ideal For
- Precision and long-range bolt-action shooters who want a one-piece mount with heavy ring clamping force
- Setups where a forward cantilever puts the scope too far forward for comfortable eye relief
- Shooters who want C1 modularity for offset dots, levels or laser range finder rails
Key Features
- Ring caps: 1"-wide, six-screw caps for more coverage and clamp force
- No forward cantilever: may help eye relief with some optic and short-action rail combinations
- Clamp: low-profile hardened steel clamp foot with four machined #10 crossbolts and low-profile T20 heads
- Material: 7075-T6 aluminum with Type III hard coat anodizing
- Cant: 0 MOA or 20 MOA (5.8 MRAD), by variant
- Modular: works with most of the Condition One accessory line
Compatibility & Fitment
- Ring diameters offered here: 34mm and 35mm scope tubes
- Use the MAX-specific Accessory Ring Cap and Anti Cant Device; Badger states the standard C1 versions are not compatible with the MAX
- Height over bore on an AR-15, per Badger: 2.76"
Technical Specifications
Type | One-piece scope mount, no forward cantilever |
Ring Diameter | 34mm or 35mm (by variant) |
Ring Height to Center | 1.54" |
Height Over Bore (AR-15) | 2.76" |
Cant | 0 MOA / 0 MRAD or 20 MOA / 5.8 MRAD (by variant) |
Ring Caps | 1" wide, six screws |
Crossbolts | Four machined #10, low-profile T20 heads, hardened steel clamp foot |
Material | 7075-T6 aluminum |
Finish | Type III hard coat anodized, Tan or Black |
Weight | 8.6 oz (34mm); 8.7 oz (35mm) |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
How is the MAX different from the standard Condition One mount?
Badger built the MAX for precision rifle shooters, with 1"-wide six-screw ring caps for more clamping force and no forward cantilever.
Will my standard C1 Accessory Ring Cap or Anti Cant Device fit?
No. Badger makes MAX-specific versions of the ARC and ACD; the standard versions are not compatible with the C1 MAX.
What does the 20 MOA version add?
It builds 20 MOA (5.8 MRAD) of cant into the mount for extra elevation travel.