The Calculated Kinetics Optic Plate for SIG P211 GTO and P320 Romeo 1 Pro Cut lets you mount optics other than DPP or SIG LOC on slides with the Romeo 1 Pro cut and RMR holes. The plates are machined in the USA from 7075 aluminum and hard anodized.
SIG makes many Romeo 1 Pro cuts, with and without RMR holes, so compare your slide to the manufacturer's photos before ordering. Explore more red dot and optic mounts, the full Calculated Kinetics range, or read our guide to pistol red dots and optic footprints before you match a plate to your SIG.
Ideal For
- SIG P211 GTO pistols
- P320 slides with a Romeo 1 Pro cut and RMR holes
- RMR-footprint and Holosun EPS/EPS Carry/K-series optics
Key Features
- Mounts non-DPP optics on the Romeo 1 Pro cut with RMR holes
- Material: 7075 aluminum, hard anodized
- Machined in the USA
- 6-40 plate screws included
Compatibility & Fitment
Made for the SIG P211 GTO, which has a Romeo 1 Pro cut with RMR holes; Calculated Kinetics says it may fit some older P320 variants. Its listing photos show which slide cuts will not work, which work with all its plates, and which work only with its EPS, RMSc and 509T plates, so check your slide first.
- RMR footprint: RMR-footprint optics; 6-40 x 10.6mm screws for Holosun and Osight and 6-40 x 0.5 in screws for Trijicon. The Trijicon RCR works with the longer capstan screws supplied with the optic. No co-witness with OEM sights on the P211; lower 1/3 with SIG #8 sights on P320s
- Holosun EPS / EPS Carry / 407K / 507K: lower 1/3 co-witness with OEM iron sights on the EPS, EPS Carry and EPS Core, and lower 1/3 with SIG #8 sights on P320s
What's Included
- Optic plate for the selected footprint
- 6-40 plate screws
- Optic screws for the selected footprint
Technical Specifications
Platform | SIG P211 GTO; some older P320 variants with Romeo 1 Pro cut and RMR holes |
Footprints | RMR; Holosun EPS/EPS Carry/407K/507K |
Material | 7075 aluminum |
Finish | Hard anodized |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
How do I know if my P320 slide will work?
Compare your slide to Calculated Kinetics' listing photos. Some Romeo 1 Pro cuts accept all its plates, some only the EPS, RMSc and 509T plates, and some none.
Will my RMR co-witness on the P211 GTO?
Not with the OEM sights. Calculated Kinetics lists a lower 1/3 co-witness with SIG #8 sights on P320s.
How often should the mounting screws be replaced?
Calculated Kinetics recommends replacing the screws every 10,000 rounds, because pistols cycle at different rates and forces and screws carry optics and plates of different weights.