The Reptilia CQG-L is a long-body pistol grip for AR-15, AR-10 and SR-25 rifles, adding half an inch of grip length for larger hands.
The CQG with room for a bigger hand — half an inch more grip, nothing else changed.
The CQG-L extends the standard CQG body by 0.5 in (13 mm) so the little finger has somewhere to go. On a compact carbine, an AR-15 pistol or a PDW-length build, a standard grip often leaves the bottom of the hand hanging off the end, which costs you the consistent, repeatable hold that everything else about the rifle depends on.
Everything that makes the CQG work is carried over unchanged: the steep near-vertical angle, the enhanced beavertail that lifts the hand higher against the receiver, and the anti-slip texturing front and rear. The same toughened reinforced nylon molding is used, so the extra length costs only 12 g over the standard grip.
Key Features
- 0.5 in (13 mm) longer body: Full purchase for larger hands and gloved hands
- Steep vertical angle: The same strong wrist position as the standard CQG
- Raised beavertail: Hand sits higher, trigger reach stays short
- Anti-slip front and rear texture: Secure hold wet, cold or gloved
- Reinforced nylon molding: 3.1 oz (89 g), hard-wearing and non-slip
Compatibility & Fitment
Fits AR-15, AR-10 and SR-25 pattern lowers, and SIG MCX and FN SCAR 16 and 17 pattern hosts, using the standard grip screw. If your hand fits a standard grip comfortably, the shorter CQG is the one to pick — the CQG-L is specifically for shooters who run out of grip at the bottom.
Technical Specifications
Platform | AR-15 / AR-10 / SR-25 / SIG MCX / FN SCAR 16 and 17 |
Type | Pistol grip, long |
Material | Toughened reinforced nylon |
Finish | Black, FDE Peanut Butter |
Weight | 3.1 oz (89 g) |
Length | 0.5 in (13 mm) longer than the standard CQG |
Made in | USA |
Brand | Reptilia |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
How much longer is the CQG-L than the CQG?
It adds 0.5 in (13 mm) to the grip body. Everything else — angle, beavertail, texture and material — is the same as the standard CQG.
Is FDE Peanut Butter the same as Flat Dark Earth?
No. FDE Peanut Butter is Reptilia's own printed color name for this grip and it is a distinctly warmer, lighter tan than the Flat Dark Earth used on some other Reptilia parts. If you are color-matching across a build, order a sample part first.
Will it fit an AR-15 pistol or PDW build?
Yes — it uses the same standard grip screw as any AR-15 pattern lower, and the extra length is aimed at exactly those compact builds where a standard grip runs out under the hand.
