The Reptilia CQG-AK is a molded pistol grip for AK-47 pattern rifles, bringing the CQG's steep vertical angle and beavertail to the Kalashnikov platform.
The AK grip problem, solved by the people who fixed it on the AR.
The standard AK grip is short, raked back and finished smooth, which is why almost every serious AK build changes it first. The CQG-AK carries across the geometry Reptilia developed on the AR: a steep vertical grip angle that rolls the wrist forward, and an enhanced beavertail that lifts the web of the hand up against the receiver instead of leaving it hanging below the tang.
Anti-slip texturing front and rear keeps the hold secure in gloves or wet weather, and the reinforced nylon molding is the same tough material Reptilia uses across the CQG range. It is a genuine ergonomics change rather than a cosmetic one — the hand ends up in a different, stronger place on the rifle.
Key Features
- Steep vertical grip angle: Replaces the AK's raked-back geometry with a modern hold
- Enhanced beavertail: Raises the hand against the receiver for a higher, tighter grip
- Anti-slip texture front and rear: Secure in gloves, rain or cold
- Reinforced nylon molding: Hard-wearing, with no slick factory finish
- Two field colors: FDE Peanut Butter and Field Drab, both Reptilia's own printed names
Compatibility & Fitment
Fits AK-47 pattern rifles using the standard AK grip screw and nut. It is not an AR-pattern grip and will not fit an AR-15 or AR-10 lower — for those, see the CQG or the CQG-NB.
Technical Specifications
Platform | AK-47 pattern rifles |
Type | Pistol grip |
Material | Reinforced nylon |
Finish | FDE Peanut Butter, Field Drab |
Made in | USA |
Brand | Reptilia |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will the CQG-AK fit an AR-15?
No. This is an AK-47 pattern grip and uses the AK grip screw and nut. For AR-15, AR-10 and SR-25 lowers, Reptilia's AR grips are the CQG, the CQG-L and the CQG-NB.
What is the difference between FDE Peanut Butter and Field Drab?
They are two separate colors, both Reptilia's own printed names. FDE Peanut Butter is a warm light tan; Field Drab is a darker, greener-brown drab. They are not shades of the same finish and will not match each other on a build.
Does it change the trigger reach?
The beavertail raises the web of your hand higher against the receiver, which brings the trigger finger closer to the trigger than a standard AK grip does. Whether that suits you depends on hand size, so it is worth handling one if you can.
