The Warne Maxima Permanent Attach Scope Rings are Warne's classic vertically split steel rings, built to attach permanently to Warne bases, Weaver-style cross-slot bases and Mil-Spec Picatinny rails. A square stainless steel recoil key in both the front and rear ring gives a no-slip recoil surface across the base slot.
Warne makes them in the USA with a wider-than-usual ring band for more clamping surface. Choose 1 inch in low, medium, high or extra high, or 30mm in low, medium, high or extra high, for objectives up to 62mm. Compare it with other rifle scope rings, shop the wider Warne catalog, or start with our guide on how to choose scope rings.
Ideal For
- Bolt-action hunting rifles on Warne, Weaver-style or Picatinny bases
- Heavy-recoiling calibers that need a positive recoil key
- Shooters who prefer a fixed, vertically split ring
- Large objectives up to 62mm with the 30mm extra high rings
Key Features
- Vertically split: classic ring design secured with four Torx T-15 socket cap screws
- Stainless recoil key: square key in both front and rear rings gives a no-slip recoil surface
- Base protection: Warne says the key helps prevent swaging or peening on softer bases
- Wide ring band: more clamping surface on the scope tube
- Steel construction: matte black finish, designed and made in the USA
Compatibility & Fitment
- Fits Warne bases, Weaver-style cross-slot bases and Mil-Spec Picatinny bases and rails
- Attaches permanently to the base or rail
- 1 inch: low up to 36mm objectives, medium up to 42mm, high up to 52mm, extra high up to 56mm
- 30mm: low up to 42mm objectives, medium up to 52mm, high up to 56mm, extra high up to 62mm
Technical Specifications
Ring Split | Vertical |
Mounting | Fixed (permanent attach) |
Material | Steel |
Recoil Key | Square, stainless steel, front and rear rings |
Finish | Matte black |
Screws | Four Torx T-15 socket cap screws per ring |
Base Screw Torque | 25 in-lb maximum, dry threads |
Top Screw Torque | Scope manufacturer's recommended torque |
1 inch Low | Dimension B 0.250 in; objectives up to 36mm; 4.3 oz |
1 inch Medium | Dimension B 0.375 in; objectives up to 42mm; 5.2 oz |
1 inch High | Dimension B 0.525 in; Dimension C 0.705 in; objectives up to 52mm; 6.2 oz |
1 inch Extra High | Dimension B 0.650 in; Dimension C 0.705 in; objectives up to 56mm; 6.8 oz |
30mm Low | Dimension B 0.250 in; Dimension C 0.705 in; objectives up to 42mm; 4.6 oz |
30mm Medium | Dimension B 0.375 in; objectives up to 52mm; 5.3 oz |
30mm High | Dimension B 0.525 in; Dimension C 0.705 in; objectives up to 56mm; 6.2 oz |
30mm Extra High | Dimension B 0.650 in; Dimension C 0.705 in; objectives up to 62mm; 7.1 oz |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Will these fit my Weaver bases?
Yes. Warne lists Warne bases, Weaver-style cross-slot bases and Mil-Spec Picatinny bases and rails.
Why does the recoil key matter?
The square stainless key engages the base slot to give a no-slip recoil surface, and Warne says it helps prevent swaging or peening on softer bases.
How do I install them?
Warne says to tighten the bottom screws to 25 in-lb maximum on dry threads, push each ring toward the muzzle to seat the recoil key, then tighten the top screws to the scope manufacturer's recommended torque.