The Warne Vapor Horizontal Scope Rings are Warne's strong, economical aluminum ring in a classic horizontally split design. They are lightweight, easy to install and STANAG 4694 compatible for Picatinny rails and Weaver-style bases.
Designed and made in the USA, they come in 1 inch and 30mm, each in low, medium and high, for objectives up to 56mm. Browse our full selection of rifle scope rings and the complete Warne range, and see our guide on how to choose scope rings for height and diameter advice.
Ideal For
- Budget-conscious hunting builds that still want a USA-made ring
- Lightweight rifles on Picatinny or Weaver-style bases
- 1 inch and 30mm scopes with objectives up to 56mm
- Shooters who prefer a fixed, horizontally split ring
Key Features
- Horizontal split: classic, easy-to-install design
- Lightweight aluminum construction
- STANAG 4694 compatible
- Fixed mounting: clamp screws to 25 in-lb maximum
- Made in the USA
Compatibility & Fitment
- Fits Maxima/Weaver bases and Picatinny rails
- 1 inch low: objectives up to 36mm; medium: up to 42mm; high: up to 52mm
- 30mm low: up to 42mm; medium: up to 52mm; high: up to 56mm
Technical Specifications
Ring Split | Horizontal |
Mounting | Fixed |
Material | Aluminum |
Finish | Matte black |
Interface | STANAG 4694; Maxima/Weaver bases and Picatinny rails |
Clamp Screw Torque | 25 in-lb maximum, dry threads |
Cap Screw Torque | Scope manufacturer's recommended value |
1 inch Low | Dimension B 0.23 in; objectives up to 36mm; 2.9 oz |
1 inch Medium | Dimension B 0.35 in; objectives up to 42mm; 2.8 oz |
1 inch High | Dimension B 0.55 in; Dimension C 0.75 in; objectives up to 52mm; 3.1 oz |
30mm Low | Dimension B 0.23 in; Dimension C 0.75 in; objectives up to 42mm; 2.7 oz |
30mm Medium | Dimension B 0.35 in; Dimension C 0.75 in; objectives up to 52mm; 2.9 oz |
30mm High | Dimension B 0.55 in; Dimension C 0.75 in; objectives up to 56mm; 3.2 oz |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
How should I tighten the ring caps?
Warne says to tighten the cap screws until snug with an even gap on both sides, then torque to the scope manufacturer's recommended value, on dry threads with no thread-locker.
Will they fit a Weaver base?
Yes. Warne lists Maxima/Weaver bases and Picatinny rails.
How much do they weigh?
From 2.7 oz (30mm low) to 3.2 oz (30mm high), per Warne.