The Warne Maxima Horizontal QD Scope Rings are horizontally split steel rings with an indexable quick-detach lever system, so you can remove your scope and put it back on without tools. Warne says the rings return to zero after removal and reinstallation and backs that with its Return-to-Zero Guarantee.
They are CNC machined from sintered steel in Tualatin, Oregon, and use a STANAG 4694 interface on Picatinny and Weaver-style bases. Choose 1 inch, 30mm or 34mm in low, medium or high to suit objectives up to 56mm. Browse our full selection of rifle scope rings and the complete Warne range, and see our guide on how to choose scope rings for height and diameter advice.
Ideal For
- Hunters who swap between optics or remove the scope for travel
- Rifles with Picatinny rails or Weaver-style bases
- Scopes with 1 inch, 30mm or 34mm main tubes
- Shooters who want tool-free removal with repeatable zero
Key Features
- Quick detach: tool-free removal and reinstallation with an indexable lever system
- Return to zero: Warne says there is no loss of zero when the rings are removed and reinstalled
- Horizontal split: four-screw ring caps using Torx T-15 cap screws
- Square recoil keys: permanently installed for positive ring-to-base engagement
- STANAG 4694 interface: Warne says it improves return to zero and rigidity
- Sintered steel: CNC machined in the USA
Compatibility & Fitment
- Fits Maxima/Weaver bases and Picatinny rails
- 1 inch: low up to 36mm objectives, medium up to 42mm, high up to 52mm
- 30mm and 34mm: low up to 42mm objectives, medium up to 52mm, high up to 56mm
Technical Specifications
Ring Split | Horizontal |
Mounting | Quick detach, indexable levers |
Material | Sintered steel, CNC machined |
Finish | Matte black |
Interface | STANAG 4694; fits Maxima/Weaver bases and Picatinny rails |
Cap Screws | Four Torx T-15 per ring |
Lever Tightening | Thumb-and-forefinger tight |
Cap Screw Torque | Scope maker's rating, 18 in-lb maximum, dry threads |
1 inch Low | Dimension B 0.250 in; Dimension C 0.650 in; objectives up to 36mm; 5.7 oz |
1 inch Medium | Dimension B 0.375 in; Dimension C 0.650 in; objectives up to 42mm; 6.6 oz |
1 inch High | Dimension B 0.525 in; Dimension C 0.650 in; objectives up to 52mm; 7.7 oz |
30mm Low | Dimension B 0.250 in; Dimension C 0.650 in; objectives up to 42mm; 6.1 oz |
30mm Medium | Dimension B 0.375 in; Dimension C 0.650 in; objectives up to 52mm; 6.9 oz |
30mm High | Dimension B 0.525 in; Dimension C 0.650 in; objectives up to 56mm; 7.9 oz |
34mm Low | Dimension B 0.257 in; Dimension C 0.650 in; objectives up to 42mm; 6.5 oz |
34mm Medium | Dimension B 0.37 in; Dimension C 0.650 in; objectives up to 52mm; 7.3 oz |
34mm High | Dimension B 0.52 in; Dimension C 0.650 in; objectives up to 56mm; 8.2 oz |
Made In | Tualatin, Oregon, USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Do I need tools to remove the scope?
No. The indexable levers allow tool-free removal and reinstallation. Warne says to tighten them thumb-and-forefinger tight.
Will my scope hold zero after removal?
Warne says the rings return to zero after removal and reinstallation and covers this with its Return-to-Zero Guarantee.
How tight should the ring caps be?
Use the scope maker's recommended torque, not exceeding 18 in-lb, on clean, dry threads with no thread-locker.