The Warne Maxima Two-Piece Steel Scope Base for Browning BAR and BPR is a firearm-specific scope base for Browning BAR and related rifles.
Warne's Maxima bases are low-profile steel bases modeled on the Weaver design, with a full-width recoil slot in each base that gives the recoil keys of Warne rings maximum bearing surface. Paired with Maxima QD rings, they let you look over the bases to use open sights. Explore more rifle scope mounts, see the full Warne lineup, or read our scope mounting guide before you order.
Ideal For
- Owners of Browning BAR and related rifles setting up a scope
- Hunters who want a low-profile steel base
- Hunting and general-purpose scope setups
- Rifles where open sights should stay usable with QD rings
Key Features
- Steel construction in a low-profile, Weaver-inspired design
- Full-width recoil slot: gives Warne ring recoil keys maximum bearing surface
- Open-sight friendly: with Warne Maxima QD rings you can look over the bases to use open sights
- Firearm-specific fitment, designed and made in the USA
Compatibility & Fitment
- Benelli R1, Argo
- Browning BAR, BAR II, Mark II, BPR, Maral
- Sauer SHR Pro Hunter
- Savage 40, 45
- Winchester SXR
- Firearm-specific fitment: confirm your exact model and action length against this list
What's Included
- Two-piece base set
- 6-48 screws
Technical Specifications
Base Type | Maxima Two-Piece Steel Scope Base |
Fits | Benelli R1, Argo, Browning BAR, BAR II, Mark II, BPR, Maral, Sauer SHR Pro Hunter, Savage 40, 45, Winchester SXR |
Pieces | Two-piece set |
Screws | 6-48 screws |
Material | Steel |
Finish | Matte black |
Profile | Low profile, Weaver-inspired |
Recoil Slot | Full width |
Ring Compatibility | Designed for Warne Maxima rings |
Base Screw Torque | 25 in-lb maximum; removable thread locker recommended |
Weight | 1.0 oz |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Which rifles does it fit?
Warne lists: Benelli R1, Argo, Browning BAR, BAR II, Mark II, BPR, Maral, Sauer SHR Pro Hunter, Savage 40, 45, Winchester SXR.
Which way does the front base go?
If the front base overhangs the receiver, Warne says the overhang should face the rear of the firearm.
Which rings should I use?
Warne designed these bases for its Maxima rings; the full-width recoil slot engages the recoil keys of Warne rings.
What torque should I use on the base screws?
Warne recommends no more than 25 in-lb and a removable thread-locking compound. If short and long screws are supplied, put the short screws in the front holes.