The Warne Maxima Two-Piece Steel Scope Base for Marlin and Henry Lever Actions is a firearm-specific scope base for Marlin and Henry lever-action rifles.
Warne's Maxima bases are low-profile steel bases modeled on the Weaver design, with a full-width recoil slot in each base that gives the recoil keys of Warne rings maximum bearing surface. Paired with Maxima QD rings, they let you look over the bases to use open sights. Browse our full selection of rifle scope mounts and the complete Warne range, and see our scope mounting guide for setup advice.
Ideal For
- Owners of Marlin and Henry lever-action rifles setting up a scope
- Hunters who want a low-profile steel base
- Hunting and general-purpose scope setups
- Rifles where open sights should stay usable with QD rings
Key Features
- Steel construction in a low-profile, Weaver-inspired design
- Full-width recoil slot: gives Warne ring recoil keys maximum bearing surface
- Open-sight friendly: with Warne Maxima QD rings you can look over the bases to use open sights
- Firearm-specific fitment, designed and made in the USA
Compatibility & Fitment
- Henry Lever Guns H009, H010, H014
- Marlin 336, 336C, 36, 30AS, 375, 1894, 1895, 444, Glenfield 30, Camp 9, Camp 45, 62
- Firearm-specific fitment: confirm your exact model and action length against this list
What's Included
- Two-piece base set
- 8-40 screws
Technical Specifications
Base Type | Maxima Two-Piece Steel Scope Base |
Fits | Henry Lever Guns H009, H010, H014, Marlin 336, 336C, 36, 30AS, 375, 1894, 1895, 444, Glenfield 30, Camp 9, Camp 45, 62 |
Pieces | Two-piece set |
Screws | 8-40 screws |
Material | Steel |
Finish | Matte black |
Profile | Low profile, Weaver-inspired |
Recoil Slot | Full width |
Ring Compatibility | Designed for Warne Maxima rings |
Base Screw Torque | 25 in-lb maximum; removable thread locker recommended |
Weight | 1.1 oz |
Made In | USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
Which rifles does it fit?
Warne lists: Henry Lever Guns H009, H010, H014, Marlin 336, 336C, 36, 30AS, 375, 1894, 1895, 444, Glenfield 30, Camp 9, Camp 45, 62.
Which rings should I use?
Warne designed these bases for its Maxima rings; the full-width recoil slot engages the recoil keys of Warne rings.
What torque should I use on the base screws?
Warne recommends no more than 25 in-lb and a removable thread-locking compound. If short and long screws are supplied, put the short screws in the front holes.