The BCM QD Sling Swivel is a push-button quick-detach sling swivel with a flush recessed plunger for AR-15 and M4 rifles, taking slings up to 1-1/4 in (32 mm) wide and fitting any standard QD socket.
A QD swivel is a small part carrying the entire weight of a rifle through a single spring-loaded plunger. When one lets go it does so without warning, usually because the button caught on a plate carrier or a bag strap. Bravo Company USA's version addresses that directly: the push button is recessed flush into the body, so a glancing knock cannot depress it far enough to release the detents.
The body is carbon steel with a manganese phosphate finish, tumble deburred and sand blasted before plating — a process that leaves no sharp edges to abrade the sling webbing at the one point where it is under constant load. It takes slings up to 1-1/4 in (32 mm), which covers the majority of two-point and convertible rifle slings.
Key Features
- Flush recessed plunger — resists the accidental release that drops a rifle
- Carbon steel body — sized for the load a sling point carries
- Manganese phosphate finish — a durable, non-reflective surface
- Deburred before plating — no sharp edges chewing at the webbing
- Takes 1-1/4 in (32 mm) slings — fits most two-point and convertible slings
Compatibility & Fitment
Fits any standard push-button QD sling socket, which includes the sockets built into most current stocks and M-LOK handguards, the BCM QD End Plate, the MCMR QD Sling Mount and the Picatinny Rail QD Sling Mount. The sling loop takes webbing up to 1-1/4 in (32 mm) wide — if your sling is 1 in (25 mm) webbing and you want it held snug rather than loose in the loop, the 1 inch D-ring version is the better match. No sling is included.
Technical Specifications
Platform | AR-15 / M4 |
Fits | Any standard push-button QD sling socket |
Type | Quick-detach sling swivel, flush recessed plunger |
Material | Carbon steel |
Finish | Manganese phosphate |
Mount Interface | Push-button QD, flush recessed plunger; sling loop to 1-1/4 in (32 mm) |
Made in | USA |
Brand | Bravo Company USA |
US Shipping & Support
Shipped from D&R Sports Center in the USA with fast, tracked delivery. Questions on fit, mounting or which model suits your setup? Our team is glad to help before and after your purchase.
Frequently Asked Questions
What sling width does it take?
Webbing up to 1-1/4 in (32 mm) wide, which covers most two-point and convertible rifle slings. If you run a 1 in (25 mm) sling and want it held tight rather than sliding in the loop, the 1 inch D-ring version is the better choice.
What sets it apart from a standard QD swivel?
The push button is recessed flush into the body instead of standing proud, so it is much harder to depress by accident against a plate carrier, a bag strap or a door frame. The body is carbon steel and the whole part is tumble deburred and sand blasted before plating.
Where can I attach it?
Any standard QD socket — the sockets built into most current stocks and M-LOK handguards, the BCM QD End Plate, the MCMR QD Sling Mount or the Picatinny Rail QD Sling Mount.
